Model H1010B Specifications
(pdf file is available on the Download Page)
Description
Marker consists of Iron casting to which is attached a replaceable 3M™ Snowplowable Marker Insert (Series 190) for reflecting light from a single or opposite directions. Reflector features:
- Polycarbonate prismatic optics,
- Abrasion resistant lens hardcoat,
- Impact resistant polycarbonate body.
All aspects of reflector installation are factory controlled to insure proper adhesion to casting.
Dimensional Details
Overall Dimensions are approximately:
- 10 inches long
- 4.9 inches wide
- 1.25 inches high
- Installed Height is approximately .250 inches above road surface
Material
Nodular Iron, conforming to Specification ASTM A536-84 Hardened to 52-54 Rockwell “C”.
Surface
Surfaces of casting shall be free of scale, dirt, rust, oil, grease or any other contaminant which may reduce its bond to the installation adhesive.
Weight
Approximately 4.5 pounds each.
Identification
Casting is marked with manufacturer’s name and model number of marker.
3M Reflector Design and Fabrication
Construction Details:
- Polycarbonate body and lens
- Dimensions are approximately 3.95 inches long (100 mm) by 1.9 inches wide (48 mm) and 0.4 inches high (10 mm)
- Face Angle: 30 Degrees
- Area of Reflecting Surface: 1.84 sq in (11.9 sq cm)
- Pad Thickness: .04 inches (1.0 mm)
3M Optical Performance
(0.2) observation angle; (measured in cd/ftcd)
|
